Dents in the body or 'stack' of a curved saxophone can be puzzling to access. Depending on where the dent is situated, you might be able to get some tooling through a tone hole, or use magnet tools to guide dent balls round the bottom bow.
You might even need to resort to removing the bell entirely to access the straight of the body, as the opening at the neck receiver is often too narrow to allow decent sized dent balls through - and of course, the octave tube protruding into the body will then block anything trying to get past.
The Ferrees N81A and N81B slotted dent attachments work around this with a simple cut out, allowing them to slip neatly past the octave tube. This is the N81S set which includes the 81A for Alto and 81B for Tenor pair.
These dent tools can be threaded onto the FN31 or FN74 mandrels and then mounted in a bench vise. With the slot facing down, you can feed a saxophone onto the mandrel and gently rotate it until you can feel the dent ball start to pass through. Once you're in, you can work with the saxophone right in front of you, quickly lifting dents and re-shaping the profile of the body.
We like to use the barrel shaped ball for working in long strokes down the stack - the profile of the contact point makes for a gentle impression as you apply and release pressure when working through the dent. You can also hammer onto this barrel shape like a forming mandrel to encourage any particularly sharp dents to co-operate before moving onto the typical 'pushing' action. The round ball will give a much more specific and concentrated area of pressure - great for placing underneath impacted pillars or for dents where the location requires total accuracy.
Our specialist trained staff are able to help you. Please contact us or call us on 01628 630800
Dawkes Music & Windcraft Ltd are a globally recognised UK based Music Industry company that have expert staff who specialise in products, performance, teaching and repairing in the brass and woodwind sector.
Purchasing a first Instrument outright need not be an expensive risk with our buy-back scheme. Return your Instrument in good condition within 6 months and we will refund 90% of the purchase price less the original VAT paid.
|Your original purchase price:||£118.30|
|We deduct the original VAT paid||£-19.72|
|We make a charge of 10%||£-9.86|
|Total Amount Refunded||£88.73|
|Total Cost for 6 Months use||£29.58|
Purchasing outside the UK means you do not have to pay the 20% VAT. However, you may have to pay tax/charges in your own country - check with your local tax office if unsure.
Once you add item(s) to the basket and select your country (as below), the price shown will exclude VAT.
We charge in UK Pounds (less tax) and your card company/PayPal will convert this amount to your local currency.
Foreign orders received before 14:00 (Mon-Fri) are despatched the same day using a tracked and insured service. All Instruments are quality checked by our own workshop prior to despatch.