FN60, FN60B, FN60A SAX POST RAISING TOOL
If a saxophone post or pillar has been pushed into the body, causing binding keywork and dents, it can be pulled back into position with the F-N60 tool. It is double ended to fit all common sized posts, and the N60B will fit Baritone saxes. You will required the L13 slide removing tool or some kind of similar puller. Simply place the tool over the affected pillar (you do not need to remove the springs) and hook your pulling tool through the hole at the other end. Aligning the puller to the correct angle, a few light pulls is usually enough to correct the damage. This method can also be used to pull dents from large brass, by soldering a temporary pillar into the centre of the dent, and using the same technique.
Our specialist trained staff are able to help you. Please contact us or call us on 01628 630800
Dawkes Music & Windcraft Ltd are a globally recognised UK based Music Industry company that have expert staff who specialise in products, performance, teaching and repairing in the brass and woodwind sector.
Purchasing a first Instrument outright need not be an expensive risk with our buy-back scheme. Return your Instrument in good condition within 6 months and we will refund 90% of the purchase price less the original VAT paid.
|Your original purchase price:||£59.85|
|We deduct the original VAT paid||£-9.98|
|We make a charge of 10%||£-4.99|
|Total Amount Refunded||£44.89|
|Total Cost for 6 Months use||£14.96|